Prodive - Connecting the VR3

Prodive Support

Connecting the VR3

		The Communication Monitor is the VR3 icon in the Top left of the main window under the word File.
		The monitor animation indicates the status of the Infra Red link.
		This icon means that communication is disabled.
		To open the com port and enable communication select File \ Enable Comms
		This icon means Prodive is listening for a VR dive computer
		Put the VR dive computer in PCLink mode. It is safe to rest the IR adaptor on the case.
		Position the IR adaptor over the VR3 lettering on the screen. Hold the IR adaptor at 90 degrees to the case.
		Position the IR adaptor towards the bottom right hand corner on later model VR3 (clips visible around the buttons). Hold the IR adaptor at 90 degrees to the case.
		Position the IR adaptor to the left of the VR2 horizontal with the case.
		This icon means the PC is receiving infra red. Prodive has not yet decided that the infra red message is coming from a VR dive computer.
		When Prodive is certain that infra red messages are coming from a VR dive computer the icon animation changes to a series of red bars. This indicates that communication is steady. You are now ready to download dives and upload gas profiles.